Watch glasses
Uhrgläser für Klein- und Großuhren - natürlich "Made in Germany".
2-component watch glass glue
€25.99*
Article name:
Watch glass glue
For firm gluing of watch glasses, gemstones, and others.
The 2-component watch glass glue is ideal for bonds that must meet the highest standards. The adhesive is resistant to chemicals, such as dilute acids and alkalis, petrol, many solvents, and moisture.
Benefits of the 2C glue: It dries clear and distinguishes itself - in comparison with fast-curing 2-component epoxy resins - by proper processing with very high resistance to yellowing (with minimal intrinsic colour).
Suitable for bonding glass, ceramics, wood, stone, concrete, marble, metals, thermosets, many hard plastics, glass fibre reinforced plastics, and Styrofoam®.
Not suitable for soft plastics, PE, PP, rubber, nylon, and for bonds that are subject to bending stress.
Because of its low viscosity, the 2-component watch glass glue is only suitable for bonding in which the adhesive composition cannot flow away during curing.
Contents: 100g resin C and 40 g hardener V20L
Air watch case opener standard
€22.99*
Brand:
Selva
For lifting the plastic glasses from waterproof one-piece watch glasses.
First, the crown and shaft are removed with the supplied crown puller. The end piece that fits the tube is placed on the pump. Air is pumped into the watch with the pump until a pressure is generated that blasts the glass up and out of the seat without damaging it.
(First pull out the crown as you do when changing the time. The stem consists of 2 parts that are connected and can be pulled out (with the special key provided). Remove the half stem and the crown with the key .Using the pump: Pull out the air pump hose completely Press the plastic tip of the air pump against the watch case (or case hose) Hold the case while placing your thumb lightly on the glass and press firmly the pump to pump the glass out of the watch.)