Product number:
344338
Product information "BERGEON Watch Bracelet Adjusting Tool"
This pin driving stand allows you to drive bracelet pins in and out without the use of hammers in a very easy way. The band support table adjusts height to fit a variety of sizes of band. Easy to use operation, just place the band in the support and line the link pin with the pusher pin. Use the outside screw to apply pressure and push the pin out of the band. This design reduces the chance of damage being done by taking out the margin of human error and hand held pin pusher and hammer have. Supplied with 5 pins:
1x 27 mm / Ø 0.80 mm
1x 33 mm / Ø 0.80 mm
1x 27 mm / Ø 1.00 mm
1x 33 mm / Ø 1.00 mm
1x 20 mm / Ø 2.50 mm
- Stability of tool make it easy to use
- Easy height adjustment for different band thicknesses
- Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length
- Fits band approximately 40mm wide
- Extra pins stored in base
- Rubber feet for skid free surface
- Swiss made
1x 27 mm / Ø 0.80 mm
1x 33 mm / Ø 0.80 mm
1x 27 mm / Ø 1.00 mm
1x 33 mm / Ø 1.00 mm
1x 20 mm / Ø 2.50 mm
- Stability of tool make it easy to use
- Easy height adjustment for different band thicknesses
- Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length
- Fits band approximately 40mm wide
- Extra pins stored in base
- Rubber feet for skid free surface
- Swiss made
| Article name: | Pin driver |
|---|---|
| Brand: | Bergeon |
| Catalogue item No.: | 7250 |
| Dimensions width mm: | 80.00 |
| External dimension length: | 100.00 |
| Gross weight grams: | 600.00 |
| Material: | Plastic |
Replacements
Replacement pin, short. Ø 1.00 mm. Length 27 mm
€31.99*
Dimensions Ø mm:
1.000
Replacement pin, short. Ø 1.00 mm. Length 27 mm.
For: Horizontal device to drive in and out pins, 7250.
Pin 2.5 mm length 20 mm for 344338 (Bergeon 7250)
€31.99*
Dimensions Ø mm:
2.500
Pin, short. Ø 2.50 mm. Length 20 mm.
For: Horizontal device for knocking in and out the tape pins (Bergeon 7250 (Flume 344338))
Pin 0.8 mm, length 33 mm for 344338 (Bergeon 7250)
€31.99*
Dimensions Ø mm:
0.800
Pin. Ø 0.80 mm. Length 33 mm.
For: Horizontal device for knocking in and out the tape pins (Bergeon 7250 (Flume 344338))
Pin 1.0 mm length 33 mm for 344338 (Bergeon 7250)
€31.99*
Dimensions Ø mm:
1.000
Pin. Ø 1.00 mm. Length 33 mm.
For: Horizontal device for knocking in and out the tape pins (Bergeon 7250 (Flume 344338))