Press stock plastic

This pin driving stand allows you to drive bracelet pins in and out without the use of hammers in a very easy way. The band support table adjusts height to fit a variety of sizes of band. Easy to use operation, just place the band in the support and line the link pin with the pusher pin. Use the outside screw to apply pressure and push the pin out of the band. This design reduces the chance of damage being done by taking out the margin of human error and hand held pin pusher and hammer have. Supplied with 5 pins: 1x 27 mm / Ø 0.80 mm 1x 33 mm / Ø 0.80 mm 1x 27 mm / Ø 1.00 mm 1x 33 mm / Ø 1.00 mm 1x 20 mm / Ø 2.50 mm - Stability of tool make it easy to use - Easy height adjustment for different band thicknesses - Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length - Fits band approximately 40mm wide - Extra pins stored in base - Rubber feet for skid free surface - Swiss made

Made of composite material. The pedestal allows to hold Watches that are equipped with a leather or metal strap, in the correct position. Composition: - 1 stand - 1 pen holder - 1 assortment of 6 pencils 1x 040 - 060 - 080 - 1.00 - 1.50 - 2.00 mm

Screw and removal device for bands Bergeon Large design, also suitable for watches with large housing. The distance between the pin driver and the device base is 60 mm. In addition, the device base is equipped with a mirror for observation. The metal bands are held in place by the plastic base in order to drive in or remove the pins. The base has holes for collecting the removed pins. Also included are screwdriver blades in various shapes and blade widths. The bands can be clamped into the pin holder and, using this blade, band screws can be unscrewed from metal bands. 2 plates with different diameters serve as bases, which are adjustable in height. Includes: - 1 plastic base 4229050 - 1 pin holder 4229063 The base are equipped with compartments with the following accessories: - 1 pin each 0.4 - 0.6 - 0.8 - 1.0 - 1.5 - 2.0 mm (SKU 4229042 to 4229047 - 2 flat blades each 0.8 - 1.0 - 1.2 mm (SKU 4229054 to 4229056 - 1 flat blade each 1.5 - 2.0 mm (SKU 4229057 to 4229058 - 1 crossblade each 1.5 - 2.0 mm (SKU 4229059 to 4229060 - 2 plates, dia. 20 mm (SKU 4229901) and dia. 28 mm (SKU 4229902)