Pen kicker
BERGEON Watch Bracelet Adjusting Tool
€538.99*
This pin driving stand allows you to drive bracelet pins in and out without the use of hammers in a very easy way. The band support table adjusts height to fit a variety of sizes of band. Easy to use operation, just place the band in the support and line the link pin with the pusher pin. Use the outside screw to apply pressure and push the pin out of the band. This design reduces the chance of damage being done by taking out the margin of human error and hand held pin pusher and hammer have. Supplied with 5 pins:
1x 27 mm / Ø 0.80 mm
1x 33 mm / Ø 0.80 mm
1x 27 mm / Ø 1.00 mm
1x 33 mm / Ø 1.00 mm
1x 20 mm / Ø 2.50 mm
- Stability of tool make it easy to use
- Easy height adjustment for different band thicknesses
- Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length
- Fits band approximately 40mm wide
- Extra pins stored in base
- Rubber feet for skid free surface
- Swiss made
Knockout device Bergeon
€193.99*
Special feature:
with 6 blades 0.4-2.0 mm
Made of composite material. The pedestal allows to hold Watches that are equipped with a leather or metal strap, in the correct position.
Composition:
- 1 stand
- 1 pen holder
- 1 assortment of 6 pencils 1x 040 - 060 - 080 - 1.00 - 1.50 - 2.00 mm
Pin remover Bergeon
€120.99*
Stainless steel handle with special profile
Ø: 0.80, 0.90, 1.00 and 1.20 mm
A tube with 4 replacement pins
Bergeon
Swiss Made
Press for versatile use Bergeon
€251.99*
Special feature:
with 6 pins + 10 screwdriver blades
Screw and removal device for bands Bergeon
Large design, also suitable for watches with large housing. The distance between the pin driver and the device base is 60 mm.
In addition, the device base is equipped with a mirror for observation.
The metal bands are held in place by the plastic base in order to drive in or remove the pins. The base has holes for collecting the removed pins. Also included are screwdriver blades in various shapes and blade widths. The bands can be clamped into the pin holder and, using this blade, band screws can be unscrewed from metal bands. 2 plates with different diameters serve as bases, which are adjustable in height.
Includes:
- 1 plastic base 4229050
- 1 pin holder 4229063
The base are equipped with compartments with the following accessories:
- 1 pin each 0.4 - 0.6 - 0.8 - 1.0 - 1.5 - 2.0 mm (SKU 4229042 to 4229047
- 2 flat blades each 0.8 - 1.0 - 1.2 mm (SKU 4229054 to 4229056
- 1 flat blade each 1.5 - 2.0 mm (SKU 4229057 to 4229058
- 1 crossblade each 1.5 - 2.0 mm (SKU 4229059 to 4229060
- 2 plates, dia. 20 mm (SKU 4229901) and dia. 28 mm (SKU 4229902)
Removal device for band pins Bergeon
€293.99*
Special feature:
with 6 pins
Large design, also suitable for watches with large housing. The distance between the pin driver and the device base is 60 mm.
The metal bands are held in place by the plastic base in order to drive the pins in or out. The base has holes for collecting the removed pins.
Includes: br
- 1 band holder made of plastic 4229050 br
- 1 pin holder 4229049
- 1 pin each 0.4 - 0.6 - 0.8 - 1.0 - 1.5 - 2.0 mm (SKU 4229042 to 4229047) br
- 1 plastic base for collecting the pins.
Screw and removal device XXL for bands Bergeon
€443.99*
Special feature:
with 6 pins + 10 screwdriver blades
Large design, also suitable for watches with large housing. The distance between the pin driver and the device base is 60 mm.
In addition, the device base is equipped with a mirror for observation.
The metal bands are held in place by the plastic base in order to drive in or remove the pins. The base has holes for collecting the removed pins. Also included are screwdriver blades in various shapes and blade widths. The bands can be clamped into the pin holder and, using this blade, band screws can be unscrewed from metal bands. 2 plates with different diameters serve as bases, which are adjustable in height. br
Includes: br
- 1 plastic base 4229050 br
- 1 pin holder 4229063 br
- 1 pin each 0.4 - 0.6 - 0.8 - 1.0 - 1.5 - 2.0 mm (SKU 4229042 to 4229047) br
- 2 flat blades each 0.8 - 1.0 - 1.2 mm (SKU 4229054 to 4229056 br
- 1 flat blade each 1.5 - 2.0 mm (SKU 4229057 to 4229058 br
- 1 crossblade each 1.5 - 2.0 mm (SKU 4229059 to 4229060 br
- 2 plates, dia. 20 mm (SKU 4229901) and dia. 28 mm (SKU 4229902)
- 2 wooden base for collecting the pins and screw driver blades.
Tool for ejecting watchband pins Bergeon
€126.99*
Two plastic bases that keep the watches with metal bracelets in the desired position on the right and left side simultaneously in order to drive band pins in or out. The plastic bases with wide slots for thick bands are equipped with holes for collecting the ejected pins. br
Includes: br
2 plastic bases 4 229 065 br
1 pin holder 4 229 048 br
6 pins from 0.4 - 0.6 - 0.8 - 1.0 - 1.5 - 2.0 mm (SKU 4229042 to 4229047) br
1 base