-
All Categories
-
Clock Movements
-
Watchmaker Tool & Workshop Need
-
Clocks and watches
-
Crafting and designing
-
Batteries
-
Jewelry parts
-
Nose piercing
-
Watch spare parts
-
Clock parts
-
Watch glasses
-
Watch movements by brands
-
Watch Straps and accessories
-
Wristwatches and pocket watches
-
Alarm clocks and large clocks
- Tools/supplies
-
3Dmensionals
-
Weather instruments
-
Craft & creative
-
Expert knowledge & literature
-
Household, security, outdoor
-
Special items
-
Catalogues
-
NEUHEITEN
-
Clock Movements
Lacke & Farben
BALLISTOL Schnellbrünierung
€13.99*
Mit der Ballistol Schnellbrünierung können Stahl (max. 3-4 % Chromgehalt) und Eisen fleckenlos brüniert werden. Egal, ob beschädigte Brünierungen Brünierungen von kleinen Bauteilen in Handwerk und Industrie: die Schnellbrünierung erspart langwierige Brünierbäder, Zeit und Geld.
• ideal zum Ausbessern beschädigter Brünierungen
• für alle Waffenstähle bis zu 3 % Chromgehalt
• abriebfest und dauerhaft
• für tiefschwarze Brünierung
VORTEILE IM ÜBERBLICK
• Oberflächenveredelung
• Zur Neubrünierung und Restaurierung leichter Beschädigungen
• Dauerhafte, abriebfeste und tief schwarze Brünierung
• Leichte Anwendung
• Korrosionsschutz
• Sehr ergiebig
• Geeignet für Stahl und Zink bis 3 % Chromgehalt
Anwendung: Die zu brünierende Oberfläche sorgsam entfetten (bspw. mit Ballistol Kaltentfetter oder Waffteile-Reiniger). Mit einem Pinsel auf die zu brünierende Fläche Schnellbrünierung aufpinseln. Min. 3 Minuten einwirken lassen, bis sich ein gelblich-weißer Belag bildet. Nun gründlich mit Wasser abspülen, mit einem weichen Tuch oder Papiertaschentuch vorsichtig trocken tupfen und mit Ballistol Universalöl oder GUNEX übersprühen.
Verbrauch: Sie benötigen ca. 100 ml Ballistol Schnellbrünierung für einen Quadratmeter zu brünierende Fläche.
Dip and brush bluing stain 200ml
€21.99*
Content:
200.00
The term "browning" comes from the word "tanning".
This also includes the blackening, which is mainly used for ferrous articles at a temperature of 300° C or higher. And because this method is far too complex and dangerous for normal domestic use, a so-called brush burnishing, which can be ideally processed at a temperature of 12 to 25° C, is used here.
Many items made of brass, copper or bronze become unsightly over time and need to be reworked. This includes, for example, lamps, candlesticks, lamp bases, vases, handles, candlesticks, figures, fittings and much more.
The partly spotted or soiled surface is first cleaned of dirt and dust adhesions with a common household cleaning agent. This is followed by rubbing with a cloth moistened with solvent to remove paint residue, oil and grease. The object is then carefully sanded down on all sides with fine steel wool (e.g. our reference 334833, 345949 or 334834) in such a way that the original metal color is visible again over the entire surface.
Only then does the burnishing follow.
To do this, the object is thinly painted over with a soft brush soaked in immersion and brush bluing stain. The stain adhering to the metal surface is moved with a brush until it changes colour. This starts with light brown, goes to a medium reddish brown, dark brown to deep black. If the desired color appears, the object is immediately held under running tap water to stop the browning. If this moment has been missed so that the part has become too dark, this can easily be corrected again: To do this, it is rubbed down again with steel wool and then blued again.
After drying, the surface is rubbed with an oily cloth. This prevents further oxidation (browning), which can happen due to humidity. When processing this metal stain, protective gloves and goggles must be worn, which you can also find in our shop.
Black stain contains harmful substances and is labeled according to the CLP regulation.
Brush cleaning with water.
MADE IN GERMANY
CLP classification: Danger
Dip and brush bluing stain set
€12.99*
The term "browning" comes from the word "tanning".
This also includes the blackening, which is mainly used for ferrous articles at a temperature of 300° C or higher. And because this method is far too complex and dangerous for normal domestic use, a so-called brush burnishing, which can be ideally processed at a temperature of 12 to 25° C, is used here.
Blueing protects and seals the brass, bronze or copper surface while providing an exceptional appearance. The associated corrosion protection also serves as a primer for further surface treatments. Primers, paints, antioxidants and protective oils adhere to it.
We have put together this practical set of materials for all those who only need to blacken a few items. It contains everything to rework brass, bronze and copper parts and make them look neatly aged.
Clean the brush with water.
The set contains:
- 1 bottle of paint and blue stain 50ml (brown to black)
- 1 mixing cup 20ml
- 1 roll of steel wool 15g
- 1 processing instructions
CLP classification: Danger
Dipping and brushing blueing stain 1 liter
€85.99*
Content:
1.00
The term "browning" comes from the word "tanning".
This also includes the blackening, which is mainly used for ferrous articles at a temperature of 300° C or higher. And because this method is far too complex and dangerous for normal domestic use, a so-called brush burnishing, which can be ideally processed at a temperature of 12 to 25° C, is used here.
Many items made of brass, copper or bronze become unsightly over time and need to be reworked. This includes, for example, lamps, candlesticks, lamp bases, vases, handles, candlesticks, figures, fittings and much more.
The partly spotted or soiled surface is first cleaned of dirt and dust adhesions with a common household cleaning agent. This is followed by rubbing with a cloth moistened with solvent to remove paint residue, oil and grease. The item is then carefully sanded down on all sides with fine steel wool (e.g. our reference 334833, 345949 or 334834) in such a way that the original metal color is visible again over the entire surface.
Only then does the burnishing follow.
To do this, the object is thinly painted over with a soft brush soaked in immersion and brush bluing stain. The stain adhering to the metal surface is moved with the brush until it changes colour. This starts with light brown, goes to a medium reddish brown, dark brown to deep black. If the desired color appears, the object is immediately held under running tap water, which stops the browning. If this moment has been missed so that the part has become too dark, this can easily be corrected again: To do this, it is rubbed down again with steel wool and then blued again.
After drying, the surface is rubbed with an oily cloth. This prevents further oxidation (browning), which can happen due to humidity. When processing this metal stain, protective gloves and goggles must be worn, which you can also find in our shop.
Black stain contains harmful substances and is labeled according to the CLP regulation.
Brush cleaning with water.
MADE IN GERMANY
CLP classification: Danger
Gold effect varnish, 25ml
€15.99*
The gold effect varnish is a yellowish, brownish, one-component transparent varnish based on solvent to create a gold effect on a silver-colored surface. It is characterized by high gloss, quick drying and good scratch resistance. It dries purely physically with evaporation of the solvents, which means that the lacquer can be wiped off with a suitable thinner after drying.
The gold effect lacquer is used specifically
- to give silver-colored metals or alloys or galvanized or vapor-coated surfaces a brass or gold-like appearance.
Deceptively real effects can be achieved, especially on silver-white, shiny surfaces (silver-plated or vapor-coated goods).
A kind of "old gold" effect results on grayish metals (for example soft cast iron, nickel, stainless steel).
Bicolor effects on silver are therefore very possible with the paint!
The gold effect lacquer on non-metallic or unmetallized substrates (e.g. glass, ungalvanized plastic, wood) is not suitable. It is best to use gold bronze lacquers here. In any case, a silver-colored surface (regardless of the material) must already exist. Not recommended for exposed areas that are naturally subject to frequent impact or showers.
The gold effect lacquer is used especially in the production of
- costume jewelry
- medals and badges
- hair accessories
- bridal jewelry
- Trach jewelry
- Christmas decorations
- Decorative and promotional items
- souvenirs
- ornaments
- handicrafts
Special dilution for patina, gold effect and old silver varnish, 50 ml
€12.99*
Special dilution for
- patina varnish (order number 326109)
- Gold effect lacquer (order number 326110)
- Old silver paint (order number 326108).
Used to remove or dilute the paints.
Top coat for sheet metal
€7.99*
Shiny protection for refined items.
It's wonderful how gilded decorations shine. To ensure that it stays that way for a long time, the KREUL top coat is recommended as a finish. The protective varnish for indoor objects protects your new favorite decor from corrosion. The varnish is easy to apply with a brush and dries to a transparent glossy finish.
Characteristics
• High-gloss, transparent protective varnish for objects gilded with leaf metal
• Water-based
• For indoor applications
• Let objects gilded with leaf metal dry for several days before painting over them
• Apply evenly and thinly with a synthetic brush. Surface dry after approx. 30 minutes, completely dry when the protective varnish is uniformly transparent.
• Brush cleaning with water
Contents: 50 ml
MADE IN GERMANY
• Surfaces: To protect objects that have been gilded with KREUL leaf metal, such as picture frames, wooden parts, cards
%
Universal colour concentrate, orange 25ml
€2.99*
€4.31*
(30.63% saved)
Ideal for colouring Porcellana Fantastica (Art.: 339493 and 339494)
Non-toxic dye solutions are ideal for mixing with water-based paints, dispersions, casting and filling compounds. They are added directly to the selected medium or first mixed into the mixed water, to then be incorporated in casting powder, for example, to create
a coloured casting or filling compound. In grade schools, first mixing attempts can be done with these dye solutions. For example, the primary colours, red, blue, and lemon, can each be mixed with water, dosed differently, or mixed with other colours to create primary colours.
Dosage: The dye bottles are equipped with a closure with a small outlet nozzle and protective cap. This allows dripping the required amounts of dye directly from the bottle. The amounts to be added listed here are non-binding and always depend on the desired colour intensity.
Addition amounts:
- powdered products: 6 - 8 %
- Filling compound: 5 - 8 %
- Liquid lacquers: 2 - 5 %
- Adhesives: 3 - 6 %
Density: 1.28 g/m3
Cleaning: water
CLP classification: non-toxic
MADE IN GERMANY
Universal Primer
€13.99*
Highly suited for priming cardboard, wood, styro foam, leather, metal, ceramics, porcelain, ceramic casting materials, and many other surfaces.
Content
125ml tub.