Soldering equipment

PROXXON Microflam gas soldering set

For working with an open flame or over a catalyst with attachments for soldering, hot cutting, smearing and shrinking of insulating hoses. Ideal for soldering on filigree parts, branding, soldering, wax shaping, foil cutting etc. With piezo ignition, 20 ml butane tank. equipment Soldering tin, drip tray, open-end wrench, stainless steel stand. In a sturdy plastic case with molded insert. Further information The devices are operated with commercial lighter gas!

€59.99*

PROXXON rechargeable battery electronics soldering device - for convenient, mains-independent soldering

• Electronically controlled temperature with short heating-up time. • Particularly high battery capacity for a long service life. For convenient, mains-independent soldering. Electronically controlled temperature (470 °C) with a short heating time. Particularly high battery capacity (2.0 Ah) for a long service life. With solder joint lighting. Including protective cover, solder and quick charger with 2.1 A charging current. Charging time approx. one hour. Technical specifications: 3.6V. 2.0Ah. 470ºC. Weight 120g

€49.99*

Small gas burner Micro Torch

Small, light gas burner with built-in piezo ignition. Easy to control flame, through to fine tip. Temperature adjustable by changing the gas-air mixture. Maximum temperature: 1300 °C. Soldering with one gas filling about 90 minutes. Can be filled with commercially available gas cartridge.

€31.99*

Soldering device type 160 N Aquarius

Manufacturer name: 160 N

In AQUARIUS welding and soldering devices, the gas is in the device is generated electrochemically from water and electricity (electrolysis). The Aquarius devices are equipped with only a relatively small electrolyte reservoir. The electrolyte will be consumed after about 1 to 3 years and must then be replaced. In order to maintain the function of the device, it is merely necessary to maintain the correct level of the electrolyte by adding distilled water. Apart from that these devices require hardly any further maintenance in everyday use. The devices generate only as much gas as is consumed at a time. The highly pure gas prevents heavy tarnishing of the jewellery being soldered. Devices with different gas outputs from 50 to 130 litres per hour are available for various areas of application. The flame temperature is up to 3200 °C, fore example, for platinum processing where no flux is used. The flame is from virtually invisible to pale blue and can be coloured green by addition of methanol and at the same time lowered to about 2400 °C. The flame can be easily dosed and used precisely to the point by the settings on the burner and the choice of nozzle size. The time required to melt a metal in soldering/welding is, however, not only determined by the temperature of the flame, but also by the rate at which the flame energy is supplied to the workpiece. In this manner, even delicate jewellery can be soldered quickly and gently, without heating the entire part. Technical equipment of all Aquarius devices offered: - Gas purification/condensate separation with filter gravel - Safety pressure limiter with audible signal - Thermostat switch for temperature monitoring - 2 flame arrestors - Integrated booster container for flux-methanol mixture - 4 years warranty Accessories for 1 workstation included with all Aquarius devices: 1 burner handpiece with fine control valve and hose 1 burner stand/burner suspension bracket each 4 burner nozzles, assorted (no. 18, 20, 22, and 26) 2 level floats 2 hoppers 1 cleaning syringe 1 electrolyte filling 1 litre of flux -For fine, small, and large soldering work in the goldsmith's and watchmaker's workshop and in the dental laboratory. Technical Specifications: - For 1-3 workstations - Reactor contents 1.35 litre electrolyte - Steplessly variable power adjustment for adjusting the gas output to the job - Amperemeter for performance monitoring 230 V / 50 Hz, 460 Watts.

€3,923.99*

Soldering device type 80 N Aquarius

Manufacturer name: 80 N

In AQUARIUS welding and soldering devices, the gas is in the device is generated electrochemically from water and electricity (electrolysis). The Aquarius devices are equipped with only a relatively small electrolyte reservoir. The electrolyte will be consumed after about 1 to 3 years and must then be replaced. In order to maintain the function of the device, it is merely necessary to maintain the correct level of the electrolyte by adding distilled water. Apart from that these devices require hardly any further maintenance in everyday use. The devices generate only as much gas as is consumed at a time. The highly pure gas prevents heavy tarnishing of the jewellery being soldered. Devices with different gas outputs from 50 to 130 litres per hour are available for various areas of application. The flame temperature is up to 3200 °C, fore example, for platinum processing where no flux is used. The flame is from virtually invisible to pale blue and can be coloured green by addition of methanol and at the same time lowered to about 2400 °C. The flame can be easily dosed and used precisely to the point by the settings on the burner and the choice of nozzle size. The time required to melt a metal in soldering/welding is, however, not only determined by the temperature of the flame, but also by the rate at which the flame energy is supplied to the workpiece. In this manner, even delicate jewellery can be soldered quickly and gently, without heating the entire part. Technical equipment of all Aquarius devices offered: - Gas purification/condensate separation with filter gravel - Safety pressure limiter with audible signal - Thermostat switch for temperature monitoring - 2 flame arrestors - Integrated booster container for flux-methanol mixture - 4 years warranty Accessories for 1 workstation included with all Aquarius devices: 1 burner handpiece with fine control valve and hose 1 burner stand/burner suspension bracket each 4 burner nozzles, assorted (no. 19, 20, 21, and 26) 2 level floats 2 hoppers 1 cleaning syringe 1 electrolyte filling 1 litre of flux For fine, small soldering work in the goldsmith's and watchmaker's workshop and in the dental laboratory. Technical Specifications: For 1 workstation Reactor contents 0.8 litre electrolyte 230 V / 50 Hz, 250 Watts.

€3,088.99*

Wireless Power Soldering Iron USB rechargable, fast heat up

• USB Rechargeable • 2200mA Li-ion Battery • Fast Heat Up • Convenient - USB rechargeable design makes the soldering iron ideal to work anywhere anytime. • Efficient-Rapid heat up and cooling helps to work efficiently and quickly. • Complete - Come with a soldering stand, which can be a charging station as well. • Safe - Working indicator ensures users’ safety; plus start switch prevents accidental activation when not in use.

€14.99*