Product number:
4580657
Product information "Soldering and melting blowpipe, head dia. 16 mm"
Suitable for all gas types (except oxygen).The flame size is adjusted by a plug valve on the gas supply. The air supply is controlled by a lever tap. br
The soldering and melting gun may only be operated in conjunction with an air compressor.
The soldering and melting gun may only be operated in conjunction with an air compressor.
| Application: | General purpose gas/compressed air |
|---|---|
| Article name: | Soldering and melting blowpipe |
| Brand: | Frey |
| Dimensions height mm: | 36 |
| Dimensions width mm: | 70 |
| External dimension length: | 210 |
| Gross weight grams: | 223.00 |
| Head Ø mm: | 16 |
Accessoires (required)
Plug for quick coupling DN 7.2 with hose nozzle for hose OD 6 mm
€7.99*
Application:
for hose ID 6 mm
|
Special feature:
with hose nozzle
Plug for quick coupling DN 7.2 with hose nozzle for hose OD 6 mm
Hose rupture protection for propane gas
€39.99*
Safety device that automatically closes the gas outlet if the nominal flow rate specified for an operating pressure is exceeded by more than 10%, e.g., in case of hose rupture or loosening of the connected tubing. For intended use and to comply with the warranty conditions, the included installation and operating instructions must be observed. 1/4" left-hand thread.
Pressure reducer for propane gas
€89.99*
Low pressure regulator with overpressure protection, pressure gauge, and grommet with 1/4" left-hand thread, up to 50 mbar, blowpipe 4580655 and 4580649.
Branch piece, propane 1/4
€15.99*
With 2 outlets, 1/4" thread, individually closable, and connection with union nut 1/4". For blowpipes.
Hose nozzle for propane gas
€15.99*
With union nut. 1/4" left-hand thread, for hose ID 6 mm, for pressure reducer 4581087.