-
All Categories
-
Clock Movements
-
Watchmaker Tool & Workshop Need
-
Clocks and watches
-
Crafting and designing
-
Batteries
-
Jewelry parts
-
Nose piercing
-
Watch spare parts
-
Clock parts
-
Watch glasses
-
Watch movements by brands
-
Watch Straps and accessories
-
Wristwatches and pocket watches
-
Alarm clocks and large clocks
- Tools/supplies
-
3Dmensionals
-
Weather instruments
-
Craft & creative
-
Expert knowledge & literature
-
Household, security, outdoor
-
Special items
-
Catalogues
-
NEUHEITEN
-
Clock Movements
€10,334.99*
Currently not available. Delivery time: about 2 weeks
Product number:
347237
Product information "WD tester Proofmaster G2 Pro Witschi"
Proofmaster Pro waterproof device from Witschi - the latest generation: compact, fast, precise.
The latest technology and intelligent algorithms, extremely simple operation and configuration, reliable and fast, with an ergonomic design with little space requirement - this is the Witschi Proofmaster Pro (G2).
The new Proofmaster is flexible:
With modular option packages and accessories, the individual needs of watchmakers, service centers, productions and laboratories are optimally covered.
WiCoTRACE software:
The Proofmaster can also be used as an independent device in connection with a PC and the PC software WiCoTRACE. This results in additional options and professional local or central parameter and result management.
Features:
• Tests with up to three test pressures in the range from -0.8 to 10 bar
• Intuitive operation via 5-inch touch screen
• Considerable increase in productivity thanks to the new, fast evaluation algorithm
• Lowerable watch support for efficient protection against unwanted scratches - Scratch-Protect
• Improved measurement reliability through increased resolution and stability of the deformation measurement
• Fully automatic sensor delivery as well as closing and locking of the bell
• New function for a safe and quick location of leaks - Leak-Finder
• Improved protection against mechanical disturbances through shock and vibration detection
• Result memory for the last 100 measurements (ring memory)
• Program memory for 50 measuring programs
• Measuring principle: Analysis of the deformation of the watch case under vacuum and / or pressure
• Deformation measurement: measuring range: -500 to + 1,200 μm, resolution: 0.01 μm
• Test pressures: Test with up to 3 test pressures
• Vacuum: -0.1 to -0.8 bar in steps of 0.1 bar / pressure 0.1 to 10 bar in steps of 0.1 bar /
• Programs (depending on the version): quick selection, fixed programs, 50 programmable programs, leak finder program, program for device checking (reference leak)
• Parameter input (depending on the version): Up to 3 different test pressures, input for Ø of the watch case for volume determination or known internal volume
of the clock, measuring time 10 to 600 s or automatic limit values for leak rates per test pressure, min-max limit values for the deformation for additional test reliability, measurement units leak rate μg / min, μl / min, mm3 / min
• Display / input: 5-inch color screen with a resolution of 800 x 480 pixels, capacitive touch function, user interface languages: E / F / D / I / SP
• Result display (depending on the version): tight / leaky, numerical values, maximum deformation, leak rate and result per test pressure, measuring times and total result
• Results memory: ring memory for 100 measurement results
• Interfaces: 2x USB type A socket, 1x USB type B socket, 1x RJ45 Ethernet, Bluetooth, dongle
• Printout with strip printer: Printout for test parameters and results. Input for customer-specific logo and text.
• Maximum dimensions of the watches (test items): diameter: 65 mm, height: 30 mm, width over watch strap: 85 mm, height of the support: 80 mm
Device data
• Dimensions: 150 x 245 x 306 mm (L x H x D)
• Weight: 6.3 kg
Optional accessories
• Witschi thermal printer, Bluetooth Flume article no. 331253
• Retrofit kit for connecting the Bluetooth thermal printer (dongle and Bluetooth winch) Flume article number 355329.
Required accessories
• Compressor Compressor L-S50-4 - 16 bar Flume article no. 4360075 or similar
• Differences between PROOFMASTER (reference 359106) and PROOFMASTER PRO (347237):
- Automatic bell and sensor lowering, TouchClose and ScratchProtect: Yes, both
- Quick selection - simple and quick parameterization: Yes, both
- Fixed test programs: each 6
- Freely parameterizable test programs with display of the leak rate, adjustable limit and measuring time: only Proofmaster Pro, 50
- Result memory: Proofmaster Pro only
- LeakFinder: Proofmaster Pro only
- Connection of a barcode reader: Yes, both
- WiCoTRACE: Yes, both (Proofmaster but only fixed test programs)
The latest technology and intelligent algorithms, extremely simple operation and configuration, reliable and fast, with an ergonomic design with little space requirement - this is the Witschi Proofmaster Pro (G2).
The new Proofmaster is flexible:
With modular option packages and accessories, the individual needs of watchmakers, service centers, productions and laboratories are optimally covered.
WiCoTRACE software:
The Proofmaster can also be used as an independent device in connection with a PC and the PC software WiCoTRACE. This results in additional options and professional local or central parameter and result management.
Features:
• Tests with up to three test pressures in the range from -0.8 to 10 bar
• Intuitive operation via 5-inch touch screen
• Considerable increase in productivity thanks to the new, fast evaluation algorithm
• Lowerable watch support for efficient protection against unwanted scratches - Scratch-Protect
• Improved measurement reliability through increased resolution and stability of the deformation measurement
• Fully automatic sensor delivery as well as closing and locking of the bell
• New function for a safe and quick location of leaks - Leak-Finder
• Improved protection against mechanical disturbances through shock and vibration detection
• Result memory for the last 100 measurements (ring memory)
• Program memory for 50 measuring programs
• Measuring principle: Analysis of the deformation of the watch case under vacuum and / or pressure
• Deformation measurement: measuring range: -500 to + 1,200 μm, resolution: 0.01 μm
• Test pressures: Test with up to 3 test pressures
• Vacuum: -0.1 to -0.8 bar in steps of 0.1 bar / pressure 0.1 to 10 bar in steps of 0.1 bar /
• Programs (depending on the version): quick selection, fixed programs, 50 programmable programs, leak finder program, program for device checking (reference leak)
• Parameter input (depending on the version): Up to 3 different test pressures, input for Ø of the watch case for volume determination or known internal volume
of the clock, measuring time 10 to 600 s or automatic limit values for leak rates per test pressure, min-max limit values for the deformation for additional test reliability, measurement units leak rate μg / min, μl / min, mm3 / min
• Display / input: 5-inch color screen with a resolution of 800 x 480 pixels, capacitive touch function, user interface languages: E / F / D / I / SP
• Result display (depending on the version): tight / leaky, numerical values, maximum deformation, leak rate and result per test pressure, measuring times and total result
• Results memory: ring memory for 100 measurement results
• Interfaces: 2x USB type A socket, 1x USB type B socket, 1x RJ45 Ethernet, Bluetooth, dongle
• Printout with strip printer: Printout for test parameters and results. Input for customer-specific logo and text.
• Maximum dimensions of the watches (test items): diameter: 65 mm, height: 30 mm, width over watch strap: 85 mm, height of the support: 80 mm
Device data
• Dimensions: 150 x 245 x 306 mm (L x H x D)
• Weight: 6.3 kg
Optional accessories
• Witschi thermal printer, Bluetooth Flume article no. 331253
• Retrofit kit for connecting the Bluetooth thermal printer (dongle and Bluetooth winch) Flume article number 355329.
Required accessories
• Compressor Compressor L-S50-4 - 16 bar Flume article no. 4360075 or similar
• Differences between PROOFMASTER (reference 359106) and PROOFMASTER PRO (347237):
- Automatic bell and sensor lowering, TouchClose and ScratchProtect: Yes, both
- Quick selection - simple and quick parameterization: Yes, both
- Fixed test programs: each 6
- Freely parameterizable test programs with display of the leak rate, adjustable limit and measuring time: only Proofmaster Pro, 50
- Result memory: Proofmaster Pro only
- LeakFinder: Proofmaster Pro only
- Connection of a barcode reader: Yes, both
- WiCoTRACE: Yes, both (Proofmaster but only fixed test programs)
Article name: | WD tester Proofmaster Pro |
---|---|
Brand: | Witschi |
Dimensions height mm: | 306.00 |
Dimensions width mm: | 245.00 |
External dimension length: | 150.00 |
Gross weight grams: | 6300.00 |
Readability: | 0,1 to 10 bar |
Volt/Hz: | 230 / 50 |
Documents
Accessoires (optional)
PC software Autoprint on CD-ROM
€314.99*
For transmitting measured values to a PC. System requirements: Windows 2000, XP, or Vista Includes: CD-ROM with PC software and instruction manual AT link cable RS232 cable
Thermoprinter Witschi
€884.99*
The new thermal printer with Bluetooth interface. Thanks to its compactness gain space and have a lot of placement options. You can print out your test and measurement results with several Witschi devices on this printer.
If you have older Witschi devices that do not have USB ports for a Bluetooth dongle, this is not a problem. Then connect your Witschi device via the RS232 connection with the printer. The ticket with your measured results after printing automatically cut off (auto cutter).
Technical specifications:
- With Dongle applicable to the Witschi devices: Chronoscope X1 (G3), Chronoscope X1 (G2), Chronoscope S1 ((G2) and Watch Expert (from generation 2016)
- Bluetooth range: max. 10 m
- Number of connectable devices: max. 10 pieces.
Verbindungskabel Druck zum Witschi Chronoskop X 1 oder Expert VI
€57.99*
Verbindungskabel Druck zum Witschi Chronoskop X 1 oder Expert VI