All Categories

Tools/supplies

Goldsmith special tools/GRS

GRS article

Jura-tools

All Categories

Jura-tools

Jura by GRS bietet eine der innovativsten Lösungen für das Halten von Werkstücken in der Schmuckindustrie.

Bei der 3X-Serie wird durch die Schaffung eines mehrachsigen Ansatzes Ihr Werkstück nie wieder aus der Mitte geraten. Dieses System nutzt die Bewegung in alle Richtungen, um einen uneingeschränkten Zugang zu gewährleisten. Das Basic Set nutzt die Jura Master Jaws und Quick Change Spannvorrichtungen, um ein System zu schaffen, das für ultimative Arbeitseffizienz entwickelt wurde. Der QC-Ansatz ermöglicht einen sekundenschnellen Wechsel der Halterungen.

Effizientes, Zeit- und Kosten-sparendes Arbeit mit Jura Werkzeugen by GRS!

Jura 3X Workholding

Jura QC Werkzeughalter-Sets

Jura QC Spannvorrichtungen

Jura Organisatoren

Jura's must have

10 mm Tensioning Device with Cylinder Top

Good for clamping small work pieces such as earrings. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€155.99*

20 mm Straight Top

This mid-sized clamp creates ideal workholding for multi-sided setting. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€174.99*

20 mm Tensioning Device with Round Top

Designed to hold rings, round pendants, and more. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€166.99*

3X Flat Clamps with Pin Holes

This fixture holds flat plates or flat, round pendants. Accommodate larger pieces by placing pins in the holes. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line.

€209.99*

40 mm Tensioning Device With Straight Top

This wide clamp creates ideal workholding for multi-sided setting. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€214.99*

6 mm Tensioning Device with Cylinder Top

Ideal for making tools, holding small workpieces, and more. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Complete Set and Advanced Set.

€155.99*

Adapter for GRS® Standard Block

Utilize the entire Jura QC Workholding System in your GRS Standard Block. Quickly drops into the pin holes of your Standard Block. Compatible with Classic QC Workholding Fixtures.

€372.99*

Digital Divider

This compact-style digital divider is great for precision layout. The hardened steel jaws can be sharpened to your desired points.

€237.99*

Drill Chuck Holder

Use this vertical chuck to custom-make tools such as beading tools, drills, and more. Also great for holding work such as earrings. This fixture is compatible with the Jura by GRS Classic QC Workholding System and the 3X Line. This item is included in the Advanced Set.

€115.99*

Jura 3X 4-Jaw Chuck

This robust and versatile fixture is the ultimate holding option for uniquely-shaped items. Four independent jaws can be adjusted in a variety of different configurations to hold your work securely. This fixture is compatible with the Jura by GRS 3X Line.

€701.99*

Jura 3x Aluminum Adapter Block

Turn any 3X workholding fixture into a tool that can be used in standard vise jaws. The Aluminum Adapter Block can be attached using the threads on the bottom of the 3X fixtures, allowing them to be clamped in any vise.

€77.99*

Jura 3X Hobo Nickel Holder

The Hobo Nickle Holder uses a unique brass collet system that has been designed specifically for the most popular coins artists work with. The outer portion of the vise provides a sturdy clamping system to reduce vibration. By attaching the orbital ball to the bottom, the artist gains the ability to tilt the fixture while being able to rotate their vise, keeping the working area centered under the microscope.

€598.99*

Jura 3X Mini Chuck

Remain efficient during the work process with this great little drop-in attachment for making tools or holding work chuck-style. This fixture is compatible with the Jura by GRS 3X Line.

€57.99*

Jura 3X Pin Vise

This pin vise was designed to be used with the 3X Orbital Holder (included with the 3X Starter Set). By using the traditional design of a pin vise and adding the orbital approach, the user can clamp their work and keep it in center while also being able to tilt the pin vise. This fixture is compatible with the Jura by GRS 3X Line.

€503.99*

Jura 3x Replacement Orbital

Avoid time spent switching the Orbital Balls from one fixture to another by adding these replacement balls to fixtures you use regularly in the Orbital Jaws.

€19.99*

Jura 3x Shellac Tubes

Shellac Tubes drop into the 3X Master clamps to hold small pieces such as earrings, pendants, or other items. The ability to use two shellac tubes at a time allows for greater efficiency. Available in four sizes to save time heating. This fixture is compatible with the Jura by GRS 3X Line. (1) 39 mm tube, (2) 20 mm tubes, (2) 15 mm tubes, (2) 11 mm tubes

€128.99*

Jura 3X Thermo-Loc® Clamps

Utilize the 3X System while holding odd-shaped pieces. Designed to help keep Thermo-Loc in place and your work secure.

€134.99*

Jura Gravierkugelsockel-Set 3 Stück stapelbar

Ein Satz von drei Sockeln hält die Arbeit auf einer gleichbleibenden Höhe, je nachdem, welche Jura-Vorrichtung Sie verwenden. Sie sind stapelbar und stabil. Dieses Set mit 3 stapelbaren Sockeln ist im Lieferumfang des 3X Starter Set enthalten

€119.99*

Jura Handspannfutter 10er-Satz

Die Jura-Handspannfutter eignen sich hervorragend für die Verwendung mit Korneisen, Polierwerkzeugen und mehr. Die halbrunden Griffe bieten einen hervorragenden Bezugspunkt bei der Verwendung von Korneisen. Die runden Griffe sind ideal zum Polieren und Körnen. Dieser Satz ist im Erweiterten Satz enthalten.

€386.99*

Jura Horizontaler Ringspanner

Ringhalter zur äußeren Fixierung von Ringen, um diese mühelos von innen Bearbeiten zu können, um 360° drehbar.

€199.99*

Jura Innensechskantschlüssel 5 mm

Dieser grosse 5 mm Inbusschlüssel mit Griff eignet sich hervorragend, um eine zusätzliche Hebelwirkung beim Festziehen der Schraubstockbacken zu erzielen. Er ist in den Sets Basic, Complete und Advanced mit MicroBlock oder MicroBlock XL enthalten.

€43.99*

Jura Keramische Anreissnadel einzeln

Die keramische Reissnadel ist für präzises Layout nützlich und verfängt sich nicht wie traditionelle Ritznadeln auf Metall. Das Ende im Spannfutter-Stil macht das Wechseln der keramischen Spitzen einfacher. (Abbildung zeig das komplette Set)

€58.99*

Jura Pinzette für Steine und Kleinteile

Eine ideale Lösung zum Aufnehmen von Steinen, Bohrern, Fräsen oder anderen Gegenständen.

€17.99*

Jura Platte flach mit M6 Gewinde

Halter zum vertikalen Einspannen von Ringen (Gravur der Ringflanke) Hilfreiche Erweiterung passend für das JURA Systemwerkzeug. In Verbindung mit den Kunststoffeinsätzen können Ringe spielend einfach an den Seiten bearbeitet werden. Lieferumfang: - 1 Platte mit M6 Gewinde

€72.99*