Handpiece QC Monarch GRS

€698.99*

Available, delivery time: 2-3 days

STK

Product number: 4525051

Product information "Handpiece QC Monarch GRS"

This is the most precise QC handpiece for secure,
ultra-fine stone setting work and
engravings, particularly in Bulino and banknote style.
The Monarch handpiece is designed
with anodised aluminium knob and
clamping piston in heat-treated stainless steel construction
with adjustable side hose connection. Including 6 QC toolholders
Length: 59 mm
Weight: 51 g

Article name:	QC Monarch
Brand:	GRS
Catalogue item No.:	004-921
External dimension length:	59.00
Gross weight grams:	170.00

Documents

Ersatzteilliste

Accessoires (required)

GRS QC toolholder for graver handle, flat, content: 3 pieces

For traditional QC gravers with flat handle. Drilled hole 3.4 mm.

€48.99*

GRS QC toolholder, traditional, extra long, 3 pieces

Extends tools by 12.7 mm

€81.99*

GRS QC toolholder, traditional, extra long, 10 pieces

Extra long QC toolholder. Extends tools by 12.7 mm. 10-pack

€274.99*

GRS QC toolholder for graver handle, flat, content: 10 pieces

For traditional QC gravers with flat handle. Drilled hole 3.4 mm.

€164.99*

GRS QC toolholder blank, contents 1 pc.

With centre hole. Blank for you to customise for special tools

€19.99*

GRS QC toolholder blank, contents 10 pcs.

With centre hole. Blank for you to customise for special tools.

€164.99*

GRS QC toolholder for graver handle, flat, content: 1 pieces

For traditional QC gravers with flat handle. Drilled hole 3.4 mm.

€18.99*

GRS QC toolholder for shaft dia. 2.34, content: 10 pieces

€146.99*

GRS QC toolholder for shaft dia. 2.34, content: 3 pieces

€44.99*

GRS QC toolholder for shaft dia. 2.34, content: 1 piece

€16.99*

GRS QC toolholder, traditional, extra long, 1 piece

Extends tools by 12.7 mm

€29.99*

Accessoires (optional)

GRS handpiece top part Airtact Monarch, aluminium, black

These kits are equipped with a special Airtact compatible knob, replacing the standard handpiece knob. A special rubber pad for the heel of the hand "senses" the required force and thus enables the Airtact to adjust the power automatically. One knob each with rubber pad, type E #6, #8, #10 (#044-944) and three rubber pads type D #1 are included.

€148.99*

GRS graver holder inserts set with dampers, Contents: 3 pcs

Change the impact strength of GRS handpieces by simply inserting a tool or graver into this new QC toolholder with damper. The special plastic cap attached at the end of the QC toolholder ensures that the force is transmitted from the handpiece to the tool more gently, softening the impact. Fine engravings and shades are easier to control, stress on the tool and hand vibrations are reduced. The difference is small, but pleasant for fine work. The QC toolholder with damper is compatible only with the GRS handpieces Monarch, 901, or Magnum. Contents 3 pcs

€91.99*

Graphite dry powder

Recommended for all compressed air-powered GRS hand pieces. Reduces friction without oily residues.

€16.99*

GRS handpiece top part Airtact Monarch, stainless steel

These kits are equipped with a special Airtact-compatible knob, replacing the standard handpiece knob. A special rubber pad for the heel of the hand "senses" the required force and thus enables the Airtact to adjust the power automatically. One knob each with rubber pad, type E #6, #8, #10 (#044-944) and three rubber pads type D #1 are included.

€283.99*