Mail: service@selva.de Phone: +49 (0) 7425 930 100
Go to homepage
icon-warenkorb Created with Sketch. €0.00
New SALE %

Milling cutters

CARBIDE milling cutters, rough teeth, cylindrical with cross cut
CARBIDE milling cutters 'Speed'
Cylindrical CARBIDE milling cutters, rough teeth, rounded off with cross cut
CARBIDE milling cutters, very rough toothing, cylindrical, with cross cut
CARBIDE milling cutters, rough teeth, cylindrical
CARBIDE milling cutters, fine toothing
CARBIDE milling cutters, rough teeth, conical, with cross cut
WS milling cutters, rough toothing with cross cut
WS milling cutters, coarse toothing
WS milling cutters, rough teeth, thick/short
CARBIDE milling cutters, coarse toothing
Milling cutters, diamond, conical
Milling cutters, diamond, cylindrical
Carbide rolling mill
Carbide rolling mill
Figure T426 Speed The new carbide cutter is suitable for all standard precious metal alloys for form milling and milling of the inside of rings, for example after soldering settings. It can also be used as part of the casting process to neaten sprue points and/or casting flashes. The TiN coating improves the life of the cutter. Recommended speed (with low contact pressure): 5000-20000 RPM

€48.99*
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 0.8mm
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 0.8mm
Head Ø mm: 0.8
Figure Carbide 33, conical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.0mm
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.0mm
Head Ø mm: 1.00
Figure Carbide 33, conical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.2mm
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.2mm
Head Ø mm: 1.2
Figure Carbide 33, conical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.6mm
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.6mm
Head Ø mm: 1.6
Figure Carbide 33, conical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.8mm
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 1.8mm
Head Ø mm: 1.80
Figure Carbide 33, conical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€7.99*
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 2.1mm
Carbide rolling mill, coarse teeth, conical, with cross-cut dia. 2.1mm
Head Ø mm: 2.1
Figure Carbide 33, conical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, cylindrical, dia. 0.8mm
Carbide rolling mill, coarse teeth, cylindrical, dia. 0.8mm
Head Ø mm: 0.8
Figure Carbide 31, cylindrical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, cylindrical, dia. 2.3mm
Carbide rolling mill, coarse teeth, cylindrical, dia. 2.3mm
Figure 486 FX, cylindrical. Carbide.

€26.99*
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 1.0mm
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 1.0mm
Head Ø mm: 1.00
Figure Carbide 31, cylindrical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 1.2mm
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 1.2mm
Head Ø mm: 1.2
Figure Carbide 31, cylindrical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 1.6mm
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 1.6mm
Head Ø mm: 1.6
Figure Carbide 31, cylindrical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 2.1mm
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut dia. 2.1mm
Head Ø mm: 2.1
Figure Carbide 31, cylindrical, with cross-cut. For treating tempered, non-hardened steel, cast steel, and similar materials. Carbide.

€8.99*
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut, rounded off, dia. 6.0mm
Carbide rolling mill, coarse teeth, cylindrical, with cross-cut, rounded off, dia. 6.0mm
Figure Carbide 72 FX, cylindrical, with cross-cut. For high strength steel, cast iron, welds, even hardened and high-alloy Cr-Ni steel and thermoset plastics. Carbide.

€35.99*
Carbide rolling mill, coarse teeth, dia. 6.00mm
Carbide rolling mill, coarse teeth, dia. 6.00mm
Figure Carbide 416 GX, conical, with cross-cut. Carbide.

€34.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.6mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.6mm
Head Ø mm: 0.6
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.7mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.7mm
Head Ø mm: 0.7
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.8mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.8mm
Head Ø mm: 0.8
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.9mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 0.9mm
Head Ø mm: 0.9
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.0mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.0mm
Head Ø mm: 1.00
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.2mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.2mm
Head Ø mm: 1.2
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.4mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.4mm
Head Ø mm: 1.4
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.6mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.6mm
Head Ø mm: 1.6
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.8mm
Carbide rolling mill, coarse teeth, with cross-cut dia. 1.8mm
Head Ø mm: 1.8
Figure 36, cylindrical, with cross-cut, pierced from outside. Tool steel.

€12.99*
This website uses cookies to ensure the best experience possible. More information...