Pyrography

Matching poker work loop set for the Brenn-Peter Junior (reference 353637) and for the Brenn-Peter Royal (reference 353948) Ornament flame loops: round, crescent, star and oval Dimensions: 150 x 80mm Made in Germany (Neckar-Alb)

Matching poker work loop set for the Brenn-Peter Junior (reference 353637) and for the Brenn-Peter Royal (reference 353948) Calligraphy flame loops: 1 to 4mm Content 4 pcs. Dimensions: 150 x 80mm Made in Germany (Neckar-Alb)

Matching poker loop set (5 pieces) for the Brenn-Peter Mini (reference 353947). The poker loop is included twice. (Poker loop flat, 2x round, pointed and fine) Dimensions: 150 x 80mm Made in Germany (Neckar-Alb)

This set is ideal for newcomers to pyrography. Thanks to the rich content, you can start right away. Delivered in a sturdy plastic storage box. Scope of delivery: • 1 25W burner • 1 storage stand • 10 pyrography pens • 9 branding stamps • 1 styrofoam knife holder with cutting knife • Manual Power output: 25W Voltage: 230V Dimensions: 250 x 135 x 40mm Weight: 400g

With the plywood cuts you can optimally test the branding equipment and practice the application before you start with your actual project. You can normally use birch and poplar for all flasks and stations, We only recommend beech hardwood for the 80W Brenn-Peter (reference 353641). Birch plywood cuts, dimensions: 10 x 10cm x 3mm thickness. Contents 4 pieces of carpenter quality, made in Germany.

For pyrography, wood or leather or cork decorations are burnt in with a hot tip or a hot wire. The lines are particularly deep in soft woods and in leather and cork. The harder the material is, the finer it can be burnt since the wood grain does not affect the line. The complete solution: Wooden boards included - get started right away. Contents: - Burner - Trestle - 2 poplar wood boards - 6 burner tips - 3 burner stamps - Sandpaper - Instruction manual

A multitude of patterns in various sizes offer many design and combination possibilities. Make wood, leather and cork into attractive and unique decorations. Great motifs from the world of animals and flowers so well as various types of scripts. 21 x 29.7 cm.

One of the most popular and best-selling poker work stations - made in Germany at the foot of the Swabian Jura. At the poker work station, the desired temperature level can be set practically and work can be carried out at a constant temperature. The maximum temperature is approximately 750 ° C. With a maximum output of around 30 watts, the temperature on the Brenn-Peter Junior can be regulated continuously. (Tip: plywood or cork need rather low temperatures, with wooden boards made of alder or maple you should turn the temperature a bit higher to get good results) The branding device is equipped with a temperature monitor. This automatically switches off the device in the event of overheating and thus protects it from damage. After the Brennpeter Junior has cooled down sufficiently, you can continue working as normal. The burning pen is connected to the burning station by two banana plugs and can therefore be easily replaced if necessary. It is suitable for beginners, advanced and professional fire painters. Note: The station is not suitable for hardwoods such as oak or beech and should only be used briefly in deep fires or at the highest temperature level. If hardwoods are also to be used, use the Brenn-Peter Master, our reference 353641. Technical specifications: - 30 watts - 230V - adjustable temperatures approx. 350 ° C - 750 ° C. - Weight about 1.3kg - Dimensions: approx. 220 x 170 x 90mm - Application for wood, leather, cork Scope of delivery: - 1 burning station - 1 burning pen - 4 flame loops, (4 different) - 1 cleaning brush - 1 quick start guide Made in Germany (Neckar-Alb) The matching burn loop set can be found under reference 353638

The Brennpeter Master is the professional branding device for advanced users, experts and professional brand painters. Ideal for use and processing, especially for large-scale work - even hardwoods such as oak or beech can be deeply fired and decorated! The firing station has a maximum output of 80 watts and is continuously adjustable from approx. 400 ° C to 1000 ° C. The powerful, strong burning pen with its powerful burn loops is screwed to the burning station with two knurled nuts. The master station is protected against damage caused by overload with a microfuse. Technical specifications: - 80 watts - 230 V. - Infinitely variable temperatures: approx. 400 ° C to 1,000 ° C Scope of delivery: - 1 burning station - 1 burning pen, large - 5 burn loops, sorted (4 different) - 1 cleaning brush - 1 spare fuse with 2 A mt - 1 instruction Made in Germany (Neckar-Alb) Application: - Wood - leather - cork - plastic (test beforehand!) - Hardwoods such as oak or beech The matching burn loop set can be found under reference 353642

Made in Germany (Neckar-Alb) • small, compact device • By using the different burning loops, two temperature levels are achieved Scope of delivery: • 1 poker work station with poker work pen • 4 burn loops sorted • 1 screwdriver • 1 shelf holder • 1 cleaning brush • 1 instruction manual Technical specifications: • Power output: 20 watts • Voltage: 230V / 0.8V • Temperature: approx. 450 ° C - 650 ° C • Dimensions: 240 x 160 x 70mm • Weight: about 640g

Made in Germany (Neckar-Alb) Ideal for getting started with pyrography - made in Germany Connect directly to the socket and burn in various motifs with different firing stamps. Version No. 3 includes • Burning device No. 3 with 26W • Storage stand and • Manual Version with an additional 5 burners: Reference 353950, also made in Germany.

Made in Germany (Neckar-Alb) Firing station that combines two models in one. The device consists of the Brenn-Peter Junior with 30W and the Brenn-Peter Master with 80W. (Both models are also available individually: references 353637 and 353641). The Royal firing station is particularly suitable for professionals, since you can choose between two pyrography stations here. • Product description "Junior": At the branding station, the desired temperature level can be set practically and work can be carried out at a constant temperature. The maximum temperature is approximately 750 ° C. With a maximum output of around 30 watts, the temperature on the Brennpeter Junior can be regulated continuously. (Tip: plywood or cork need rather low temperatures, with wooden boards made of alder or maple you should turn the temperature a bit higher to get good results) The branding device is equipped with a temperature monitor. This automatically switches off the device in the event of overheating and thus protects it from damage. After the Brennpeter Junior has cooled down sufficiently, you can continue working as normal • Product description "Master": The Brennpeter Master is the professional branding device for advanced users, experts and professional brand painters. Ideal for use and processing, especially for large-scale work - even hardwoods such as oak or beech can be deeply fired and decorated! The firing station has a maximum output of 80 watts and is infinitely adjustable up to 1000 ° C. Scope of delivery of the "ROYAL" • Burning station in a sturdy plastic-coated metal housing • 1 small firing pin, up to 750 ° C • 1 firing pin, up to 1,000 ° C • 9 burn loops sorted • 1 screwdriver • 1 cleaning brush • 1 storage bracket • 1 spare fuse 2A • 1 instruction Technical data "ROYAL" • Power outputs: 30W and 80W • Voltage 230V / 0.5 to 1.4V or 0.2 to 2.0V • Weight about 3,500g • Dimensions: 260 x 245 x 120mm

Made in Germany (Neckar-Alb) Ideal for getting started with pyrography - made in Germany Connect directly to the socket and burn in various motifs with different firing stamps. Version No. 4 includes • Burning device No. 3 with 26W • 5 different burning tips • Storage stand and • Manual Variant without the 5 firing tips: Reference 353949, also made in Germany

The poker work iron is a burn device for pyrography and actually looks like a normal soldering iron. However, there is one, not insignificant difference between the Brenn-Peter iron and a soldering iron: With pyrography iron, the shaft of the burner is shorter - this makes the device much more convenient, ergonomic and comfortable to use and more efficient. The temperature of the poker work flask reaches about 450 ° C and cannot be regulated. This poker work flask is particularly suitable for beginners. With this gift, which we have put together for you, you are well equipped to get started with pyrography: In addition to the poker work flask Brenn-Peter, which can be connected directly to the socket with a cable, 5 different firing tips, various tools and good instructions for pyrography are included - all packed in a sturdy wooden storage box, ideal as a gift Content: - Brenn-Peter 26 W. - 5 burning tips - Template pad - cleaning brush - storage stand - safety deposit - screwdriver - tweezers - fine sandpaper - Manual. Technical specifications: - 26 watts - 230V - temperature range approx. 450 ° C. Made in Germany (Neckar-Alb) Reference 353639 - Brenn-Peter work box: same content, but with tools instead of wood blanks Reference 353640 - Gift set Brenn-Peter: Contents the same, but with a wooden blank instead of tools

Pyrography starter set Well thought-out branding set. Including: 1 branding flask 1 holder for placing the branding iron, 6 fine paint pens in different designs, 4 special branding irons, 9 decorative branding stamps. 1 Styrofoam cutting blade with adapter insert, detailed operating instructions. In a practical plastic storage box. Further information 230V/25W

Power supply with infinitely adjustable temperatures from 450 to 740 °Centigrade and an iron with 3 tips. Incl. stand and instructions. Technical data:Primary current 220-240 V AC/50-60 Hz,secondary current 1.6 V for pyrography irons.Max. 30 W. LED-control.

untreated pine wood Pre-sanded, untreated pine wood for staining, painting, decorating. Features Ideally suited for 18-note music movements Tip: Create a special look with brass balls as "feet", our No. 327813. Dimensions 12.5 x 11.5 x 7.5 cm.

Matching burn loop set for the Brenn-Peter Master. The burn loop is included twice. (Fig. From left to right: flame loop flat, pointed, shovel and flame loop round 2 x) Made in Germany (Neckar-Alb)

Matching flame loop set for the Brenn-Peter Junior (reference 353637). The burn loop is included twice. (Fig. From left to right; flame loop flat, 2x round, pointed) Made in Germany (Neckar-Alb)

(w/o illus.). Suitable for Burny Stars S and L. 3 tips included.

Suitable for Burny Stars S and L. 3 pcs./pack.

Pyrography, soldering and modeling with one unit! Through various atttachments, the unit can be used for pyrography, for modeling wax or plastics, for soldering and for cutting styrofoam. Technical data: 220-240 V AC, electronic temperature control adjustable from 50-500 °Centigrade; LED indicator light; soldering iron 24 V DC/20 W; gS-tested. Case: 95 x 155 x 60 mm. Included are: 6 pyrography points, externally heated; 7 design points; cutting and modeling blade; stand; instructions.

untreated pine wood Pre-sanded, untreated pine wood for staining, painting, decorating. Features Ideally suited for 18-note music movements Dimensions 15 x 10 x 10 cm.

Bell making has a very long tradition in Germany. For more than 200 years, the rare craft of the clamp locksmith's shop has been in Thuringia, near the Rennsteig (Wartburg). Right there, somewhat hidden in the romantic Ebersbach Valley, we have found a small production facility that has been producing good sound in original craftsmanship for more than 140 years and that produces real Tyrolean bells for us. The original Tyrolean bells are composed of two half-shells, a gallows and a clapper. The production requires patience and skill, so that the bells get their unique appearance and do not form wrinkles in the end. For this reason, after the pre-embossing, a second embossing is still achieved today, for example with a slow-working, hydraulic drawing press. Only when all the individual parts are made by hand in their raw form from deep-drawn sheet metal, the composition takes place. Then our original Tyrolean bells receive a special antique brass finish: The bells are dipped in a graphite crucible with liquid brass at a temperature of 1100 degrees. After carefully pulling out, the still glowing bells are knocked against a hard object. This cuts off the unnecessary brass that has collected at the bottom of the bell. The bell is then cooled in a cold water bath. By cooling the bell gets a deliberately irregular surface structure. The bells are copper-plated for an additional five to ten minutes. The copper bath is necessary to make the dark sulfur liver stick to the brass. After coppering, they are briefly immersed in a bath with sulfur liver, which makes the bells dark. Finally, the bells are dried and scrubbed in a special dryer. This rubs off the dark sulfur liver at the raised areas on the surface and exposes the brass. It is only through this complicated process that the bells finally acquire their antique, unique appearance. The bells made for us are each provided with ribbons / loops made of real leather. This natural leather with its own patina can be individually decorated and decorated with our branding stations (e.g. with the Brenn-Peter, reference 353637, or also with the firing flask) for individual design. Dimension height: 4cm. Also available in 6cm height with a darker sound: reference 353749 MADE IN GERMANY (Thuringia) Showing views from production include the photos, such as the embossing of the half-shells, the welding of the bracket, the oldest machine in operation and the bells in preparation before welding the hook.