€34.99*
Content:
1 Liter
Currently not available. Delivery time: about 3 weeks
Product number:
361848
Product information "Tin figure patina gray 1 liter"
Made in Germany
Patina, especially for figurine pewter.
The newly cast pewter figures and decorative parts are lightly sanded with fine steel wool (e.g. references 345949, 334834, 334833), then patinated.
To do this, the patina is painted on all sides with a soft brush (e.g. references 336276, 336275, 359109). Make sure that the patina does not run off the pewter part, so move the brush on it until the pewter object is covered with an even shade of gray / black. Then hold it under running tap water and thereby stop the oxidation. After drying, the surface can be rubbed again with steel wool in the areas that should appear lighter. In order to preserve the color, the part can be carefully painted over with a brush stained with oil and thus protected.
Color: gray / black tint
Content: 1000ml
NOTICE:
Due to the ban on the sale of tin alloys below 98% Sn (Sn = symbol for the chemical element tin), this patina has been so effectively revised that it causes the desired dark oxidation primarily for alloys above 50% Sn.
If this were now applied to a tin alloy containing a lot of lead, which was previously used for figure casting, it would appear almost black on it. This could be reduced by adding a few drops of distilled water to the required amount of patina: This can reduce the intensity of the patina effect. This is of course also generally applicable if a lighter patina is desired.
For tin alloys below 50% Sn, Tiffany patina black (our reference 361846) could be used as an alternative, which then turns this alloy very strong and intense black.
We are glad that we can still offer you pewter patins, as there are hardly any companies that manufacture them today.
With our patina, tin sheets and veneers can also be darkened evenly.
Patina, especially for figurine pewter.
The newly cast pewter figures and decorative parts are lightly sanded with fine steel wool (e.g. references 345949, 334834, 334833), then patinated.
To do this, the patina is painted on all sides with a soft brush (e.g. references 336276, 336275, 359109). Make sure that the patina does not run off the pewter part, so move the brush on it until the pewter object is covered with an even shade of gray / black. Then hold it under running tap water and thereby stop the oxidation. After drying, the surface can be rubbed again with steel wool in the areas that should appear lighter. In order to preserve the color, the part can be carefully painted over with a brush stained with oil and thus protected.
Color: gray / black tint
Content: 1000ml
NOTICE:
Due to the ban on the sale of tin alloys below 98% Sn (Sn = symbol for the chemical element tin), this patina has been so effectively revised that it causes the desired dark oxidation primarily for alloys above 50% Sn.
If this were now applied to a tin alloy containing a lot of lead, which was previously used for figure casting, it would appear almost black on it. This could be reduced by adding a few drops of distilled water to the required amount of patina: This can reduce the intensity of the patina effect. This is of course also generally applicable if a lighter patina is desired.
For tin alloys below 50% Sn, Tiffany patina black (our reference 361846) could be used as an alternative, which then turns this alloy very strong and intense black.
We are glad that we can still offer you pewter patins, as there are hardly any companies that manufacture them today.
With our patina, tin sheets and veneers can also be darkened evenly.
| Application: | Patinating pewter figures & decorative parts |
|---|---|
| Article name: | Tin figure patina |
| Brand: | Piccolino |
| Colour: | gray |
| Content: | 1000.00 |
| Unit content: | ml |
Documents
Accessoires (optional)
RAKSO Steel wool very fine
€11.99*
Processing mode:
sehr fein
Made..
- for matting high-gloss surfaces
- for polishing waxed woods with new wax
- to bring copper and brass to a shine
- to dry glass
RAKSO steel wool
8 pads, a total of 200 g.
The practical 8 PADS format is aimed at home improvement and craftsmen who work on smaller surfaces and expect a user-friendly pre-portioning of the steel wool.
RAKSO is the synonym for steel wool in Germany and in many European countries. Derived from the first name of the company founder Oscar Weil, the RAKSO brand was created as early as 1901. For more than 100 years, a unique, wide assortment of steel wool products has been established under this brand umbrella.
As with the company founder, the guiding principle "quality first" is still valid today, both for the traditional and for all new products. This is how RAKSO stands today
Steel wool characterized by purity, elasticity and environmental friendliness.
Premium quality since 1901
VARIANTS:
00 = reference 334834 (fine)
000 = reference 334833 (very fine)
0000 = reference 345949 (exrrem fine)
These fine grades 0000, 000 and 00 of the RAKSO STAHLWOLLE-PADS are particularly suitable for polishing, for the fine intermediate sanding and for cleaning more sensitive
Surfaces.
Including detailed work instructions and exact application recommendations.
RAKSO Steel wool fine
€11.99*
Processing mode:
fine
Made..
- for matting high-gloss surfaces
- for polishing waxed woods with new wax
- to bring copper and brass to a shine
- to dry glass
RAKSO steel wool
8 pads, a total of 200 g.
The practical 8 PADS format is aimed at home improvement and craftsmen who work on smaller surfaces and expect a user-friendly pre-portioning of the steel wool.
RAKSO is the synonym for steel wool in Germany and in many European countries. Derived from the first name of the company founder Oscar Weil, the RAKSO brand was created as early as 1901. For more than 100 years, a unique, wide assortment of steel wool products has been established under this brand umbrella.
As with the company founder, the guiding principle "quality first" is still valid today, both for the traditional and for all new products. This is how RAKSO stands today
Steel wool characterized by purity, elasticity and environmental friendliness.
Premium quality since 1901
VARIANTS:
00 = reference 334834 (fine)
000 = reference 334833 (very fine)
0000 = reference 345949 (exrrem fine)
These fine grades 0000, 000 and 00 of the RAKSO STAHLWOLLE-PADS are particularly suitable for polishing, for the fine intermediate sanding and for cleaning more sensitive
Surfaces.
Including detailed work instructions and exact application recommendations.
Gilding Brush size 0
€16.99*
Special feature:
Größe 0
Round oval-shaped, black goat's hair, plastic quill, with coloured wire on an untreated wooden handle.
Brush Set, 5 parts
€32.99*
Top quality at an advantageous price!
Pointed, reddish Toray bristles; seamless ferrules; short, glossy black handles.
Sizes: 2 / 4 / 6 / 8 and 10.
RAKSO Steel wool extra fine
€11.99*
Processing mode:
extreme fine
Made..
- for matting high-gloss surfaces
- for polishing waxed woods with new wax
- to bring copper and brass to a shine
- to dry glass
RAKSO steel wool
8 pads, a total of 200 g.
The practical 8 PADS format is aimed at home improvement and craftsmen who work on smaller surfaces and expect a user-friendly pre-portioning of the steel wool.
RAKSO is the synonym for steel wool in Germany and in many European countries. Derived from the first name of the company founder Oscar Weil, the RAKSO brand was created as early as 1901. For more than 100 years, a unique, wide assortment of steel wool products has been established under this brand umbrella.
As with the company founder, the guiding principle "quality first" is still valid today, both for the traditional and for all new products. This is how RAKSO stands today
Steel wool characterized by purity, elasticity and environmental friendliness.
Premium quality since 1901
VARIANTS:
00 = reference 334834 (fine)
000 = reference 334833 (very fine)
0000 = reference 345949 (exrrem fine)
These fine grades 0000, 000 and 00 of the RAKSO STAHLWOLLE-PADS are particularly suitable for polishing, for the fine intermediate sanding and for cleaning more sensitive
Surfaces.
Including detailed work instructions and exact application recommendations.
Brush for gilding with leaf metal, set of 2
€12.99*
Always the right brush at hand.
Gold-plated objects are breathtakingly beautiful. The finishing technique needs a lot of tact, but with the KREUL brush set for gilding it can be done without any problems. The secret: The creative brush set is equipped with two brushes, each intended for a specific work step. The dark synthetic brush is used to apply application milk (reference 334325) and top coat (reference 359107). The leaf metal (reference 359108) is applied with the light synthetic brush. So nothing sticks unnecessarily and the gilding works almost by itself with the brushes.
characteristics
• Brush set for gilding with application milk and leaf metal (references 334325 and 359108)
• Perfect for getting started with sheet metal art: the set includes all the brushes you need.
• For applying application milk and top coat: dark synthetics, flat size. 12, use (references 334325 and 359107)
• For laying on sheet metal: light nylon synthetics, flat size. 12, use (reference 359108)
• Brush cleaning with water
Contents: 1 x Synthetics, flat size. 12 for applying application milk and top coat; 1 x nylon synthetics, flat size. 12 for applying the leaf metal