Product number:
335978
Product information "PROXXON fine drilling polisher FBS 240 / E"
The PROXXON fine drilling polisher FBS 240 / E with a maximum speed of 20,000 / min can be infinitely fed back to 5,000 rpm by full-wave electronics.
With almost the same torque in the lower speed range.
This is especially important for fine boring, brushing and polishing.
20 mm system fit for use in MICROMOT drill stands and horizontal pedestals.
particularities
Variable speed from 5,000 to 20,000 rpm, with almost the same torque in the lower speed range - particularly important for fine boring, brushing and polishing. Spindle lock and quick-action chuck (Ø 0.5-3.2 mm).
Further information
High-quality, balanced, low-noise motor (230 V / 100 W). Housing made of glass fiber reinforced nylon. Complete with 40 high quality tools in practical plastic box.
Dimensions
Length: 21.5 cm. Weight 450 g.
With almost the same torque in the lower speed range.
This is especially important for fine boring, brushing and polishing.
20 mm system fit for use in MICROMOT drill stands and horizontal pedestals.
particularities
Variable speed from 5,000 to 20,000 rpm, with almost the same torque in the lower speed range - particularly important for fine boring, brushing and polishing. Spindle lock and quick-action chuck (Ø 0.5-3.2 mm).
Further information
High-quality, balanced, low-noise motor (230 V / 100 W). Housing made of glass fiber reinforced nylon. Complete with 40 high quality tools in practical plastic box.
Dimensions
Length: 21.5 cm. Weight 450 g.
| Article name: | Fine drilling polisher |
|---|---|
| Brand: | Proxxon |
| Colour: | green |
| Content: | 1.00 |
| External dimension length: | 215.00 |
| Gross weight grams: | 0.00 |
| Manufacturer name: | FBS 230/E |
| Special feature: | with 40 tools |
| Speed R/min: | 5000-20000 |
| Unit content: | pc |
| Unit length: | mm |
| Volt/Hz: | 230 |
| Watt: | 100 |
Accessoires (optional)
PROXXON Three-jaw steel drill chuck
€12.99*
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 50/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity 0.3 - 3.2mm.
Drill chucks provide more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets: Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.