All Categories

Clock Movements

Quartz movements

All Categories

Quartz movements

For DIY enthusiasts:
Clock movements from SELVA
Hobbyists know that SELVA is Europe's largest specialist for clock movements. All movements are manufactured to strict quality standards and have been tested for performance and longevity. This guarantees high precision and reliability throughout the life of your selfmade clock.

Here you will find everything you need to replace your old quartz movement yourself: Quartz movement, quartz movement WK "Made in Germany", reverse quartz movement, quartz movement set, Hermle quartz movement as well as the Made-In-Germany quality movements from DUGENA.

Please order clock hands separately!

Central screw M10 x 0.75 white, short

€14.99*

Central Screw M8 x 0,75 brass, long

External dimension length: 16.00

Central screw m8 x 0.75 brass, long

€12.99*

Central Screw M8 x 0,75 brass, medium

External dimension length: 11.00

Central Screw M8 x 0,75 brass, medium

€11.99*

Central screw m8 x 0.75 yellow, average

External dimension length: 9.00

Central screw m8 x 0.75 yellow, average

€11.99*

Central screw M8 x 0.75 yellow, extra long

External dimension length: 21.00

Central screw m8 x 0.75 yellow, extra long

€17.99*

Central screw m8 x 0.75 yellow, short

External dimension length: 5.00

Central screw m8 x 0.75 yellow, short

€11.99*

Central screw-wrench/ spanner

For the central screws and nuts of all common battery and synchronous clockworks. Particularly stable design made of high quality steel. Ø 52 mm.

€18.99*

Central screw-wrench/ spanner, universal key

For central screws and nuts. Next adjustment range. Also for opening screwed wrist watch bottoms.

€20.99*

Dugena 838 quartz movement, pointer length 16.2mm - reverse running

The hands of this quartz movement run to the left, i.e. counterclockwise (for gag clocks). Please order suitable pointers separately. Equipment: retractable hanger, complete installation accessories Installation Ø: 78mm Matching pointers up to a maximum of 120mm Dial thickness approx. Up to 7.0mm Pointer shaft length with second approx. 18.5mm Pointer wavelength without second approx. 16.2mm Successor to the Junghans factory 4123-104726

€14.99*

Haller rotary pendulum movement for screw pointers

Function: for clocks with screw hands

Resistant, patented quartz rotating pendulum movement without a pendulum spring Secure, fixed bearing, for pendulums with rigid axles (no pendulum springs) • No vulnerable spiral or pendulum spring • Secure fixed storage, no use of adjusting washers • Extremely quiet, slow running • Does not require exact alignment of the clock in the "water" (the previous exactly horizontal base/alignment, which one had to pay attention to in the past with mechanical annual clocks, is no longer necessary - the innovative, quartz-controlled annual clocks also run on a slightly "sloping" surface, which just isn't is exactly "in the water") • Robust - over-tightening is not possible. • Running time up to two years with an alkaline mignon cell, type "AA" Rotating pendulum movement with euro shank for pointer attachment with pointer nut. (Usually used for higher quality watches with metal hands)

€47.99*

Haller rotating pendulum movement for plug hands

Function: for clocks with plug hands

Resistant, patented quartz rotating pendulum movement without a pendulum spring Secure, fixed bearing, for pendulums with rigid axles (no pendulum springs) • No vulnerable spiral or pendulum spring • Secure fixed storage, no use of adjusting washers • Extremely quiet, slow running • Does not require exact alignment of the clock in the "water" (the previous exactly horizontal base/alignment, which one had to pay attention to in the past with mechanical annual clocks, is no longer necessary - the innovative, quartz-controlled annual clocks also run on a slightly "sloping" surface, which just isn't is exactly "in the water") • Robust - over-tightening is not possible • Running time up to two years with an alkaline mignon cell, type "AA" Rotating pendulum movement with minute tube/hour tube for hands (usually plastic) to attach (Mainly used for watches in the entry-level class or with plastic hands)

€47.99*

Mini quartz movement MQM UTS, PSL 11.5mm

Hand wavelength mm: 11.50

Dial center hole Ø only 7 mm Installation Ø 53 mm Center hole Ø only 7 mm Matching hands up to max. 60 mm Equipment: 32 mm second hand, installation accessories. Delivery INCLUDING second hand, spacer, central screw, pointer nuts

€32.99*

Mini quartz movement MQM UTS, PSL 9.00mm

Hand wavelength mm: 9.00

€32.99*

Power High Torque Sweep Movement WS, ZWL 16mm

Power high torque Ishaft sweep movement HIGH TORQUE - LOW-POWER DISSIPATION Dimensions: 56 x 55 x 15mm Operating voltage DC1.25V - 1.7V Operating temperature: -10°C-50°C Rated voltage: 1.5V Battery size AA (LR6) , 1pc not included Time keeping accuracy: +/- 1 sec per day at 1.5V, 25°C Average current under 180 uA at 1.5V Second shaft torque over 300uN-m at 1.5V - Minute shaft length 16.0mm - Hour shaft length 14.0mm - Centre screw length 9.8mm

€23.99*

Quartz clock movement Hermle 2114 HSL 21.00mm, Westminster or Bim Bam

Hand wavelength mm: 21

HERMLE QUARZ MELODIE PW EURO STOCK 20.1 MM WITHOUT PENDING DEVICE • Integrated battery holder • 2 x LR14 batteries are required (Ref. 2625002) Delivery INCLUDING spacer, central screw, pointer nuts, hanger, operating instructions

€95.99*

Quartz clock movement Hermle 804, ZWL 16mm, Westminster or Bim Bam

Hand wavelength mm: 16.00

The movement is a 4/4 Westminster Bim / Bam clockwork with 16.2 mm hands made by Hermle

€95.99*

Quartz clock movement kit with sweeping second

Movement kits including matching hands! Scope of delivery: Movement with manual setting option and two clock hand sets with seconds, minutes and hour hand. Bar pointer: 83mm / 76mm and 54mm (sec./min./hour), pointer bulb: 81mm / 76mm and 56mm. Dimensions movement 55 x 40 x 71mm, axle length 17mm. suitable for dials with a thickness of max. 6mm.

€19.99*

Quartz clock movement UTS 800, hands length 16,20mm

Hand wavelength mm: 16.20

Available while stocks last UTS quartz movement, Euro shaft 16,2mm Please order pair of hands separately! Movement length with seconds: 18.5 mm Movement length without seconds: 16.2 mm Delivery INCLUDING second hand, spacers, central screw, 2 pointer nuts, hanger, operating instructions.

€16.99*

Quartz clockwork set Dugena 838, pointer length 11mm - 10 pcs.

Property: PWL 11mm

Exclusive set of 10 movements with Dugena 838, version pointer wavelength 11mm Equipment: retractable hanger and installation accessories. Please order pair of hands separately! Matching pointers: up to max.120mm Installation Ø: 78mm Delivery including second hand Dial thickness approx. Up to 3.0mm Pointer wavelength with second approx. 13.5mm Pointer wavelength without second approx. 11mm Successor to the Junghans factory set 341117 Also available individually under reference 360082

€67.99*

Quartz clockwork set Dugena 838, pointer length 11mm - 100 pieces on a pallet

Hand wavelength mm: 11.00

100 clockworks on pallet: Dugena 838, design pointer length 11mm Equipment: retractable hanger and installation accessories. Please order pair of hands separately! Matching pointers: up to max.120mm Installation Ø: 78mm Delivery including second hand Dial thickness approx. Up to 3.0mm Pointer shaft length with second approx. 13.5mm Pointer wavelength without second approx. 11mm Successor to the Junghans factory set 339041 Also available individually or as a set of 10

€404.99*

Quartz clockwork set Dugena 838, pointer length 16.20mm - 100 pieces on a pallet

Hand wavelength mm: 16.20

100 clockworks on pallet: Dugena 838, version pointer length 16.2mm Equipment: retractable hanger and installation accessories. Please order pair of hands separately! Matching pointers: up to max.120mm Installation Ø: 78mm Delivery including second hand Dial thickness approx. Up to 7.0mm Pointer shaft length with second approx. 18.5mm Pointer wavelength without second approx. 16.2mm Successor to the Junghans factory set 339457 Also available individually or as a set of 10

€404.99*

Quartz clockwork set Dugena 838, pointer length 16.2mm - 10 pcs.

Property: PWL 16,2mm

Exclusive set of 10 movements with Dugena 838, version pointer wavelength 16.2mm Equipment: retractable hanger and installation accessories. Please order pair of hands separately! Matching pointers: up to max.120mm Installation Ø: 78mm Delivery including second hand Dial thickness approx. Up to 7.0mm Pointer wavelength with second approx. 18.5mm Pointer wavelength without second approx. 16.2mm Successor to the Junghans factory set 4123-104725 Also available individually under reference 360083

€67.99*

Quartz clockwork set Dugena 838, pointer length 20.1mm - 10 pcs.

Property: PWL 20,1mm

Exclusive set of 10 movements with Dugena 838, version pointer wavelength 20.1mm Equipment: retractable hanger and installation accessories. Please order pair of hands separately! Matching pointers: up to max.120mm Installation Ø: 78mm Delivery including second hand Dial thickness approx. Up to 13mm Pointer wavelength with second approx. 22.5mm Pointer wavelength without second approx. 20.1mm Successor to the Junghans factory set 339424 Also available individually under reference 360084

€67.99*

Quartz clockwork set Dugena 838, pointer length 20.1mm - 100 pieces on a pallet

Hand wavelength mm: 20.10

100 clockworks on pallet: Dugena 838, pointer length 20.1mm Equipment: retractable hanger and installation accessories. Please order pair of hands separately! Matching pointers: up to max.120mm Installation Ø: 78mm Delivery including second hand Dial thickness approx. Up to 13.0mm Pointer shaft length with second approx. 22.5mm Pointer wavelength without second approx. 20.1mm Successor to the Junghans factory set 339407 Also available individually or as a set of 10

€404.99*